The last thing you want to happen in the sale of your property are the complications and incidents that may affect the operation in a negative way. The good news is that there are simple things you can do to make sure these things do not happen during the liquidation process. One of the key elements as far as it relates to the actual sale of real estate is the correct assessment and implementation of a complete home inspection. A critical part of the task is a clear understanding of the key elements of the home inspection.

Major issues in building integrity

1. Termite damage and infestation

This is a type of damage to real estate properties you do not want to lose control. Termite infestation is a reality we must face when you have treated pine. These dreaded pests are capable of literally rotting wooden structure of the house of your dreams in a matter of months. A reliable home monitoring activity should be able to check the points and places in the home of the paths of termites. Specifically, the inspection report of the house should provide data and information about any structural wood may have been affected by the infestation of termites in the floor joists to the roof supports.

2. The proper solution of the Foundation House

This is a fundamental structural problem that must be appropriately noted in the written report of inspection of the house. Both hairline and structural cracks may develop and affect the foundations and the floor slab becomes wet or dry gradually over time. Structural and cosmetic repair to correct these structural abnormalities should be adequately reflected in the written report. One of the biggest problems is that you should worry about their potential liability in cases falling plaster and masonry, as a result of cracks and problems on the lathe and plaster.

It is also essential to check for damages and structural problems affecting the main line in the interior and the exterior of the building structure. The main cause of these problems is the movement of the building structure. This is a problem common to gas utilities and electricity even though you may have to carefully inspect PVC tubes as these materials can develop fractures, even with the slightest movement of the building structure.

3. Shortcuts in the construction process

This can be perceived by some to be too critical about the process of home inspection. However, we must emphasize the need to comply with minimum standards such as the width of the mortar joints of bricks. Its failure to meet the required standard may seriously affect the structural integrity of the building structure. Other structural issues we are dealing with the buckling of the floors and the use of untreated wood components or cure in portions of the structure where the pipes are installed.

4. The problems in the plumbing and septic system

It is very important to check the plumbing system of your property before the home inspection. The inspection activity shall open simultaneously taps to check water pressure. The septic system is also inspected for possible drainage problems. Septic system inspection is usually done with the use of dye. The presence of the pigments on the leach field and septic tanks is an indication of a drainage problem.

5. Insecure and inadequate Electric Systems

The configuration switch and electrical panel must meet minimum safety standards required for your home. The activity of home inspection applies to receptacles in the kitchen and the bath containing the automatic safety switch for system overload and short circuit.The written report will confirm the presence of such containers, not the inferior "work around" crafts that usually does not connect properly.